AMP MICROMATE FULL

Based on the plug uniform base centerline, the MQS interconnection ranges from MQS and Micro Power Quadlok (MPQ 2.8) to Power Quadlok (PQ 5.2) which can be subjected to higher current carrying capabilities. For higher pin counts mating aids like levers are applied. For lower pin counts the MQS Terminals are inserted safely into the contact cavity and latch with a clear click. The portfolio ranges from low (2-16 position) to medium and high (>40 positions) pin counts on the receptacle side. The MQS Connectors consists of wire-to-wire as well as wire-to-board versions, with several key codings and ensuring ergonomic assembly and safe installation.

Higher packaging requirements can only be fulfilled by Nano-MQS Portfolio. Micro-Fit 3.0 Blind-Mate Interface (BMI) Connectors are designed for blind-mating applications. OEMs often need power connectors in space-constrained applications. The MQS interconnection offers one of the most compact packages – by a centerline of 2.54mm x 2.54mm for non-waterproof and 4.00mm x 3.45mm for waterproof applications. The Micro-Fit Connector Family offers up to 8.5A with a 3.00mm pitch, delivering power in a compact package in wire-to-wire and wire-to-board configurations. The Quadlock terminal portfolio is completed by Micro Power Quadlok (MPQ 2.8) to Power Quadlok (PQ 5.2) with higher current carrying capability up to 45 Amps. Having the right response on complex space constraints such as in battery cell modules the MQS flexible foil crimp terminals are the ideal solution.

current carrying capacity of 7.5 A at 80 ☌. MQS 0.63 terminals are offered in different wire size ranging from 0.08mm² to 0.75mm² and tin, silver and gold plating, reaching a max. The receptacle terminals have a square mating area and contact its four contact points (one on each side) on a 0.63 x 0.63 mm pin contact. Secondary locking is provided by a pre-assembled plastic device from the MQS connector and its on the same level for all Quadlok terminals facilitating combinations within the housings. What our clients say about us Micromate solves the four essential problems all medical robotics should tackle: ease of use, accuracy, consistency, and affordability. We intend to make the new 'Revised” parts available for purchase on our website should you wish to change out various parts on your existing AMP MATE.The special feature of the MQS contact is the separation of the main functions – the internal contact body provides all electrical functions, while the superimposed steel cantilever spring provides all the mechanical functions by protecting and retaining the contact. A high primary terminal locking force, for such a small size system, is achieved by the use of a stainless steel metal locking lance. Proven clinical value Read case reports Based on clinical data from Micromate usage in CBCT-guided percutaneous procedures. We are confident the changes we have made to the new unit will make AMP MATE function as we always intended. The new AMP MATE Revised will handle any case length from 300 Blackout to 338 Lapua Magnum. Revised feed mechanism brackets which allow for moreĬonsistency during manufacturing which prevents the slider jamming and changes to the feed control tab spring mount.

AMP MICROMATE FULL

Revised loading arms which allow for full insertion of shortĬases such as 300 Blackout into the annealer. New position sensor no longer requires the addition of the black grounding wire We also added a small tab which prevents cases such as the 6mm Dasher from ejecting incorrectly. If it is not the cycle with stop allowing the offending case to be removed (use caution as it will be hot). The switch must be closed each time an eject is performed in order for the cycle to continue. The PCB also give slightly more power to the insert and eject servos.ĭid we say is comes in black now? Due to this change a shorter custom made USB cable is now provided with each AMP MATE to reduce clutter.Įjector micro switch mounted as standard on a redesigned servo mount which detects aĬase stuck in the shell holder upon eject and stops the cycle. New PCB which removes the need for the clamp on ferriteįilter to be placed on the USB cable to prevent coms failure when using a case We identified a number of key areas and redesigned them to make it more consistent to build and to fix the problems people were having. Since then we have worked on how we can improve the AMP MATE.

Amp micromate